Works in conjunction with Skylink transmitters R3T2 and R3T4.
Add, delete and temporarily disable transmitter(s) individually.
Relay output rated 1Amp \@24V AC/DC.
Programmable relay dry contact of NC or NO or Toggle mode.
Programmable timed relay contact from 0.3 - 2.5 seconds.
Three Super bright 7-segment LED Displays provides operation and programming.
4 LEDs indicate the system activity.
Standard 16-key keypad with audible tone.
Supplied with a 9-inch antenna with standard F Type connector.
Operating range up to 300 feet.
Operating Frequency : 433.9MHz.
Operates in 12 - 24V AC/DC.
Dimensions: 4-1/4x4-1/4x1 inches.
Installation is as simple as 1-2-3
Connect
the pushbutton or radio terminals from your gate opener to the 2 screw
contacts labeled 'Relay Com' and 'NO Contact' on the Gate Receiver
model R4G.
Connect the 12V - 24V power from your gate opener to the Gate Receiver model R4G.
Learn the transmitter R3T2 or R3T4 to the Gate Receiver model R4G.
Installation is now completed. Activate the Keychain Transmitter to operate the gate opener.
